|
| FT
780 0104
Rev. 2 0610 |
| APPLICATION
hinges are designed for interior swing doors 10 mm thick, especially
made of glass.
They ensure:
- Automatic return to the 90°
balanced position
- Stopping in the 0� et 180°
open positions in a Ã
10� zone. |
| |
| ASSEMBLING |
| Door
: |
| -
Height x width = 2,10 m x 1,00 (maximum) |
| -
Thickness : 10 mm |
| -
Load 52 kg (maximum) |
| -
Notch, see opposite |
| Spacing
from the support: |
| -
With a normal notch: 4 mm |
| -
With a deep notch: 2 mm |
| |
| .
Remove the leaves and counterleaves and attach the
hinges flat on the |
| door
jamb, making sure they are aligned. |
| .
Check for the presence of the cork gaskets and install the leaves
and counterleaves on |
| the
door. |
| .
Slide the clamps onto the cams attached to the door jamb. |
| Level
and straighten the door. |
| .
Thighten the screws completely (use the 4 mm and 5 mm Allen
wrenches; |
| recommended
torque : 0.35 m.kg for M6 screws and 0.90 m.kg for |
| M8
screws). |
| (After
screwing the plates to the door jamb, it is also possible |
| to
attach the counterleaves to them. Then install the door and
leaves). |
| Make
sure there is no risk of opening |
| the
door more than 90° beyond the balanced position. |
| If
there is, provide a stop. |
|
| FINISH
- DECOR
hinges are made of aluminium and are available in five finishes
:brushed anodized natural colour, white epoxy (RAL 9010), gold anodized,
bright polished anodized and chrome. The hardware is made of stainless
steel.
ACCESSORIES
.
The door may be fitted with a handle. it is recommended to use:
-
 crystal
handles (hole diameter:14 mm), family 704
- "cup"
handles mad of anodized light alloy (hole diameter : 16 mm), family
708
.
Stops : see family 799 of the general 
catalogue.
PARTS
LIST
| PART
NUMBER
|
DESCRIPTION |
SOLD
BY
|
| 648 27Q |
 -
hinge - Brushed natural anodized |
Set
of 2 |
| 648 28R |
-
hinge - White epoxy (RAL 9010) |
Set
of 2 |
| 648 29S |
-
hinge - Gold anodized |
Set
of 2 |
| 648 30T |
-
hinge - Bright polished anodized |
Set
of 2 |
| 648 31U |
-
hinge - Chrome |
Set
of 2 |
| 704 01Y |
"Crystal
ball" handle, dia. 50 mm - Chrome-plated brass pin |
Set
of 2 |
| 704 02Z |
"Crystal
ball" handle, dia. 50 mm - Polished brass pin |
Set
of 2 |
| 704 03A |
"Crystal
ball" handle, dia. 60 mm - Chrome-plated brass pin |
Set
of 2 |
| 704 04B |
"Crystal
ball" handle, dia. 60 mm -Polished brass pin |
Set
of 2 |
| 704 05C |
"Crystal
ball" handle, dia. 70 mm - Chrome-plated brass pin |
Set
of 2 |
| 704 06D |
"Crystal
ball" handle, dia. 70 mm - Polished brass pin |
Set
of 2 |
| 704 11K |
"Crystal
half- ball" handle, dia. 50 mm - Chrome-plated brass
pin |
Set
of 2 |
| 704 12L |
"Crystal
half-ball" handle, dia. 50 mm - Polished brass pin |
Set
of 2 |
| 704 13M |
"Crystal
half- ball" handle, dia. 60 mm - Chrome-plated brass
pin |
Set
of 2 |
| 704 14N |
"Crystal
half- ball" handle, dia. 60 mm - Polished brass pin |
Set
of 2 |
| 704 15P |
"Crystal
half- ball" handle, dia. 70 mm - Chrome-plated brass
pin |
Set
of 2 |
| 704 16Q |
"Crystal
half- ball" handle, dia. 70 mm - Polished brass pin |
Set
of 2 |
| 708 14X |
Light
alloy cup handle, Hight 380 - Natural shade anodized |
Set
of 2 |
| 708 16Z |
Light
alloy cup handle, Hight 280 - Natural shade anodized |
Set
of 2 |
| 708 20D |
Light
alloy cup handle - dia. 142 mm - Natural |
Set
of 2 |
| 708 21F |
Light
alloy cup handle - dia. 142 mm - Gold anodized |
Set
of 2 |
| |
NEW |
|
|
|
|
|
|
| SEE OTHER HINGES FAMILIES : |
|
 |
|
|
|
|
|
| |
| |
|
ADLER SAS - Z.A. La Barogne - 9, Av des 22 Arpents - 77230 Moussy le Neuf - France
Tel.: +33 (0)1.60.03.62.00 - Fax :+33 (0)1.60.03.62.49
E-mail : admin1@adler-sa.com
|
