lifting beam - multipurpose lifting beam workshop - site, 24 VDC

Multipurpose workshop/site RELDA suction lifting beams. Simple and robust design with a 100 % steel structure, four Ø320 mm suction cups, with a load capacity of 500 kg (or 320 kg if dual system). Extra-large 6500 cm³ vacuum tank for maximum operational Multipurpose workshop/site RELDA suction lifting beams. Simple and robust design with a 100 % steel structure, four Ø320 mm suction cups, with a load capacity of 500 kg (or 320 kg if dual system). Extra-large 6500 cm³ vacuum tank for maximum operational safety, even with a single circuit.
Main functions:
- manual positioning between vertical and horizontal positions with mechanical auto-locking in both positions;
- manual rotation of the suction cup frame with 3 indexing positions: 0° and +/-90°;
- individual isolation of each suction cup by ¼-turn valve;
- 3 m³/h vacuum pump controlled by electronic vacuostat:
- self-supporting on tripod built into the structure for storage without post or case;
- installation of rigid casters possible on the handle for handling, loading onto a trailer… by a single person (featured as standard on site lifting beams);
- job site lifting beams: 24 VDC batteries – on-board charger – Single-phase 240 V power supply. Approx. 8h autonomy at 3 cycles/hour. Audible alarm in case of vacuum fault and low battery (job site lifting beams)
Universal lifting beam (workshop/job site) Load capacity: 500 kg. Empty weight = 75 kg.