" Prestige " range from ADLER®

USE

Thanks to their smooth movement and their quality of finishing, these brass hinges belong to the top of quality fitting items for glass.

They are designed for 6 and 8 mm glass door, for furniture, show cases.

DESCRIPTION

Two models are available, with differencies in the notching and drilling.

• 640 01S, 640 00R and 640 49U : for glass doors not exceeding 1000 mm X 500 (H x W)
• 640 11C, 640 51W and 640 47S : for glass doors not exceeding 1400 mm X 600 (H x W)

• rotation on ball,
• fixing plate is one complete part of the hinge,
• to be fixed on wooden, metal,... frame

FIXING

• Notch (and drill) the glass doors.
• Unscrew the counter plates.
• screw bottom and upper fixing plates onto frame.
• Set up the glass doors on the pivot hinges, making sure that cork shims will avoid direct contact between glass and metal on one hand, and avoid the glass to slide inside the hinge.
• Screw back the counterplates tightly on the hinges.

FINISH

Pivot hinges of the ADLER "Prestige" range, made of brass, come with three finishes :

• polished chrome
• gold-plated
• mat chromed

" DESIGN " ADLER® RANGE

USE

The "Design" ADLER® pivot hinge range is a declination of the "PRESTIGE" range, it is however different with its softer outside shape (round and champfered edges). Other features are identical.

The " Design " ADLER® pivot hinge range has the same outside dimensions than these of the "Prestige" range (65 x 36 mm). It is different in regard of :

• the row material, made of aluminium bronze,
• the ball less rotation system.

• hinges with plate : 639 50M, 639 51N, 639 52P
• hinges on socket : 639 53Q, 639 54R, 639 55S

They are designed for fixing 6 and 8 mm glass doors, with dimensions not exceeding 1400 X 600 mm (H x W) on wood, metal etc of furniture and display case frames.

Hinges with frame plate :

Hinge fits on the pin axis but both parts (hinge and fixing plate) are independant.

hinges on socket :

Retractable pivot is in stainless steel, socket is in polyacetal (Delrin). A headless screw allows pivot to stand out and stay in the socket.

FIXING

• Notch and drill the glass doors .
• Hinges with plate have the same notch as hinges 640 11C.

Hinges with frame plate :

• Drill holes for frame plates ;
• Set up the glass doors on the pivot hinges, making sure that cork shims will avoid direct contact between glass and metal on one hand, and avoid the glass to slide inside the hinges. Screw but do not tighten yet the screws of the counterplates.
• a) Bring the door, hinges and frame plates in position ;
• b) Screw tigthly bottom and upper frame plates in position;
• c) Adjust the glass door in hinges and tighten counterplate's screws.

Hinges on socket :

• Drill the base and the roof 8 mm from the edge, diam.10mm, 8mm minimum depth .
• Insert the socket.
• Set up the hinges on the glass door, making sure that cork shims are in position. Screw but do not tighten yet the screws of the counter plates.
• Retract pins after loosening their headless screws. Set the glass door up. Replace pins and tighten their screws.
• Adjust the glass door in hinges.
• Tighten the plate and counterplate's screws.

FINISH

The ADLER® "Design" range hinges, in aluminium bronze, are offered in 3 finishes :

• chrome
• gilded brass
• mat chrome

" Economic " range

USE

These hinges are perfectly suitable for 5 mm thickness glass door assembling, especially when quality/price ratio is the main factor.

DESCRIPTION

3 models are available  :

• 2 large models (65 mm x 35 mm),one model has a zamak outer face and a nylon inner face, second model has 2 zamak surfaces, for glass door not exceeding 22 kg.
• 1 small model (54 mm x 26), 2 zamak sides ; for glass door not exceeding 12 kg.

Identical characteristics :

• rotation in a plastic socket,
• retractable pin.

FIXING

• Notch and drill the glass door.
• Drill the base and roof, 7 mm from the edge, diam.7.5, depth : 9 mm minimum. Introduce the nylon socket. Use socket 640 66N or 640 67P to fix hinges on its glass base.

• Set up hinges on glass door, making sure that cork shims are fitted. Screw but do not tighten yet the screws of counterplates.

• Retract pins after loosening their headless screws. Set the glass door up. Replace pins and tighten their screws.

• Adjust the glass door in hinges.
• Thighten the plate and counterplate's screws .

FINITION - DECOR

Zamak surfaces are available with a chrome, glazed chrome, gold and glazed gold finish.

ACCESSORIES

ADLER S.A. catalogue has a great number of accessories to fit glass doors.

• locks : see families 639, 640c, 640d and 641;
• Latches : See families 630, 640e and 652b ;
• knobs : family 699.

Notices :

• Family 630 from general catalogue provides many models of clips on pivot suitable for . Glass doors without notch (or drill) maintained by tipped screws.
Glass door dimensions are given as indication only. Claims can not be raised against Adler on that respect. Prior to any type of realisation, it is recommanded to make sure of the properties by the construction of a prototype.